【
Displays and Buttons
】
A) SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown to set the hour and minute hands.
B) SETTING THE DATE
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the
following day.
1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.
3. After the date has been set, push the crown back to the normanl position.
C) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to maximum of 1 hour.
【
Measuring time with the chronograph
】
1. The chronograph can be started and stopped each time button "PB1" is pressed.
2. To reset, press button "PB2" and the chronograph second & minute hands return to the zero positions.
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph second hand do not return to the zero second
position after the chronograph has been reset, and including after the battery has been replaced.
1. Pull the crown to the 2nd Click Position.
2. Press the button "PB1" once to set the chronograph second hand ahead one scale, or keep pushing to
to set the chronograph second hands quickly.
3. Once the chronograph second hand has been zeroed, reset the time and return the crown to its normal
position.
* Do not return crown to normal position while chronograph second hand return to 12:00 ( ZERO ) position.
Hand stops on the way when crown are returned to normal position and these positions are recognized as
12:00 (ZERO) position.
These specifications might be changed without prior notice.
4. Instruction Manual
PB 2
Reset
Time
Measurement
Stop
PB
PB
PB
PB
Normal Position
1st Click Position
2st Click Position
Chronograph
Second Hand
Chronograph
Minutes Hand
Small Second Hand
PB 1
24 Hour Hand