PRECAUTIONS
1. Resistance to water
Check the chart to determine the water resistant
properties of this watch.
2. Avoid temperature extremes
Avoid leaving your watch in extremely warm or cold
locations for long periods of time.
• This may cause your watch to gain or lose time and
affect its other function.
• The watch restores its original accuracy if it is placed
in normal temperature.
3. Avoid strong shock
This watch will withstand the bumps and jars
normally incurred while playing and during sports
activities.
Avoid dropping your watch on the ground or
subjecting the watch to severe shock which may
cause malfunction or damage.
4. Avoid strong magnetic fields
Keep your watch out of the immediate vicinity of
strong magnets. Generally, your watch is not
affected by magnetic fields from such household
appliances as television sets and stereo equipment.
5. Static electricity
The integrated circuits used in the watch are
sensitive to static electricity. If exposed to intense
static electricity, the watch’s display may lose its
accuracy.
6. Avoid harmful chemicals, solvents and gases
Avoid wearing your watch in the presence of strong
chemicals, solvents and gases. If your watch comes
in contact with materials such as gasoline, benzine,
paint thinner, alcohol, spray cosmetics, nail polish,
nail polish remover, adhesives or paint,
discolouration, deterioration or damage to the case,
band, and other components may occur.
7. Keep your watch clean
It may become difficult to pull out the crown due to
dirt and dust getting caught between the crown and
the watch case when the watch is worn for long
periods of time. To help prevent this from happening,
turn the crown freely back and forth occasionally
while it is in the normal set position.
Wipe off any water and moisture that adheres to the
case, glass and band with a soft, clean cloth. Any dirt
left on the case or band may cause skin rash.
A watchband will easily become soiled with dust and
perspiration because it is in direct contact with the
skin. Even a stainless or gold-plated band may begin
to corrode if it has not been cleaned for a long period
of time.
Mesh bands, because the meshes are very fine, will
lose their particular “flexibility” if they are left soiled
for a long time.
Metal watch bands should be washed periodically to
keep them looking beautiful at all times.
Metal watchbands are usually washed with a brush
in mild, soapy water and well wiped with a soft,
absorbent cloth to make sure all water is removed.
Pay attention to prevent any water from getting
inside your watch when the band is washed.
8. Periodic inspection
Getting your watch checked once in two or three
years is recommended to ensure long use and
trouble-free operation.
