CHANGING THE MODES
Other than the time display, this watch has alarm
and chronograph main display functions.
SETTING THE TIME
Check that the mode hand is
indicating <TME> and the
watch is in time mode.
1. Pull the button
M
out, so that
the second hand stops at the
“0” position. When the watch
is adjusted by button operation,
the time setting is completed
by electromagnetic correction.
1.
Time setting synchronizes the minute hand
➝
hour hand
➝
24-hour hand. When adjusting the
hour hand, check the 24-hour hand position
(am/pm).
2. Set the time by pressing the button
B
or button
C
.
Each time button
B
is pressed…The watch
advances 1 minute in a clockwise direction.
Each time button
C
is pressed…The watch turns
back 1 minute in a counterclockwise direction.
Depress button
B
or button
C
continuously, the
hands move rapidly. turn the hands in the
direction that is closest to the set time.
3. After setting the time, push the button
M
to the
normal position and the watch will start at the
correct time.
SETTING THE CALENDAR
Press button M to switch to calendar mode <CAL>.
1. Pull button
M
out.
2. Press button
A
to correct
the month number.
Correction can be made by
advancing by one month each
time button
A
is pressed.
The month number can be
read directly from the normal
hour positions.
2.
(Example: 3:00
➝
March, 1:00
➝
January)
Correction can be made rapidly by holding button
A
down.
3. Press button
B
to correct the date.
Correction can be made by advancing one day
each time button
B
is pressed. The date
advances one day when the function hand makes
four turns. Correction can be made rapidly by
holding button
B
down.
4. Push button
M
in to the normal position.
* Since the date and function hand are synchronized
with each other, the function hand will turn at
when correcting the date.
* Date correction at the end of each month is not
required. However, since February is set at 28
days, date correction must be performed only for
February in leap years.
Leap Year Adjustment
1. Press button
M
to change the mode to <CAL>.
2. Pull out the button M by one click.
3. Press button
C
for more than two seconds to
set/cancel the leap year.
•
The leap year is set if button
C
is continuously
pressed when March 1 is displayed.
•
The leap year is cancelled if button
C
is
continuously pressed when February 29 is
displayed.
4. Push button
M
back into normal position.
* Once the leap year is set, February 29 is
displayed once in every four years.
Displays present time in
hours, minutes, seconds
and 24-hours.
Use the 24-hour hand to
confirm am/pm.
Displays current date by
second hand (month)
and date. Since the
date and function hand
are syncronized with
each other, the function
hand will turn at when
correcting the date.
Display alarm set time.
The alarm setting is in
1 minute. Confirm of
am/pm with the 24-hour
hand. If the alarm is
ON, it will ring at the set
time for 15 seconds
once every day.
Measures up to a
maximum 60 minutes
in 1/20 seconds, and
displays split times.
A confirmation rings
when you start/stop or
measure a split time.
Each press of the M button changes Time <TME>
➝
Calendar <CAL>
➝
Chronograph <CHR>.
Confirm the change with the mode hand.
After that it returns to the time <TME> display.
