Citizen CYBER AQUALAND Manual Download Page 2

77

76

S

Sa

affe

etty

y P

Prre

ec

ca

au

uttiio

on

ns

s:: O

Ob

bs

se

errv

ve

e a

att A

Allll T

Tiim

me

es

s

The following provides an explanation of those matters that should be observed at all
times to prevent injury to the wearer or other persons as well as damage to property
before they occur.  

The degree of injury or damage resulting from incorrect use while ignoring
the indicated matters is classified and explained using the following
markings.  

WARNING

This marking indicates matters for which there is the
risk of death or serious injury.  

CAUTION

This marking indicates matters for which there is the
risk of injury or property damage only.  

The types of matters to be observed are classified and explained using the
following mark (the following indicates two examples of icons).  

This mark indicates that caution or attention is required.

This mark indicates prohibited matters.  

WARNING

Read this manual carefully and pay attention to all warnings.  Make sure you fully
understand the use, displays and limitations of the watch.  Neglecting to understand
and follow the instruction manual may cause errors to be made during diving that may
lead to serious injury or death.  

IIn

nttrro

od

du

uc

cttiio

on

n

Thank you for your purchase of the Citizen CYBER AQUALAND.  Please read this manual
carefully before using your watch to ensure that it is used properly.  Furthermore, make
sure to store this manual in a safe place for future reference as necessary.  

CYBER AQUALAND is a diver's watch containing a built-in dive computer and provided
with its own depth gauge.  The watch is able to automatically store various data (maximum
depth, dive time, etc.) generated during diving as well as diving profile data, and display
that data in the form of log data.  
By installing AQUALAND GRAPH 2001 in your personal computer from the CD-ROM
provided with the watch, you can incorporate data stored in the watch in your PC using the
communication unit and infrared communication interface provided.  You can enter text
into diving data that has been incorporated into your PC, generate graphs of diving data or
attach still pictures or animated image data all with a simple procedure, and then manage
this data collectively in the form of diving logs.  Since these logs can be printed out or
converted into HTML documents, storage of diving records is both simple and convenient.  
In addition, the use of CAPgm, which is installed simultaneous to installation of
AQUALAND GRAPH 2001, makes it possible to make various watch settings (including
travel time, alarm and timer settings) while also allowing different graphics to be displayed
on the watch for different days.  

We hope that the use of CYBER AQUALAND will allow you to get even more enjoyment
out of your recreational diving activities.  

* To users using a previous HYPER AQUALAND product (Model No. D20*):

• If you are using the DOS version or Windows Ver. 1/Ver. 2 of AQUALAND GRAPH

(HYPER AQUALAND dedicated software), you can use existing diving data managed
with each version of AQUALAND GRAPH by importing that data to AQUALAND GRAPH
2001.  

• HYPER AQUALAND data can also be received using AQUALAND GRAPH 2001

software.  Please note, however, that the type of communication unit and connection
cable differ between CYBER AQUALAND and HYPER AQUALAND.  

(Please refer to the AQUALAND GRAPH 2001 instruction manual contained on the CD-
ROM provided for further information regarding the procedures for importing and
receiving data.)

Summary of Contents for CYBER AQUALAND





















Reviews: