CITIZEN SYSTEMS JAPAN CO.,LTD.
25
3
3
.
.
C
C
l
l
e
e
a
a
n
n
i
i
n
n
g
g
t
t
h
h
e
e
F
F
i
i
l
l
t
t
e
e
r
r
* Please clean the filter and bottom of the printer regularly.
1. Open the front cover by pressing the open button.
2. Remove the filter cover.
3. Clean the filter with a brush or vacuum. Also clean the bottom of the printer around the fan motor.
(Dust might accumulate on the paper and affect the print quality adversely)
Note: If the filter is washed using water, make sure the filter is thoroughly dried before
replacing it. Remaining water could cause the printer to malfunction.
4. Reset the filter in the opposite order from removing it. Push the filter cover until it clicks into
place.
-
It’s important to keep the filter clean.
-
If the filter is blocked or clogged, the temperature inside the printer will rise, and the thermal
head will overheat.
- If the thermal head overheats, the printer will stop, and the error LED will blink. In this
case, the printer will resume printing automatically after the temperature of the thermal head
drops enough for printing.
-
A similar situation may occur when the print head is overheated by continuous high power
use such as when printing many black images.
Fan motor
Filter
Filter cover
-
Before cleaning, always switch off the printer.
CAUTION
