— 22 —
Bluetoo th status LED
The LED on the Bluetooth interface board on the rear of the printer indicates the
status below.
Pairin g operati on
You need to perform the operations below the first time you establish a Bluetooth
connection for Bluetooth data communication.
A: Detect Bluetooth devices
B: Configure pairing settings
A
:
Detecting Bluetooth devices
Confirm that Bluetooth is enabled on the host PC before searching for Bluetooth
devices.
This product will show up as "CT-S851
II
_XX"(XX is last 2 digits of unique BD address.)
when it is detected.
Select this product from among the detected devices.
Note: You can search for devices and change the names.
When memory switch MSW13-5 is set to "No Response" nothing is displayed by
device detection.
You can temporarily switch this setting to device detection (detect mode) by pushing
the switch on the Bluetooth interface board. Detect mode is exited when the
connection between the host PC is terminated.
3.3 Bluetooth Interface Board
Status
Description
LED Status
Detection
standby
(Discoverable)
Standing by for
detection and
connection
Connection
standby
(Connectable)
Standing by for
connection
iOS connection
Data session unopened
Communicating
iOS: data session
opened
Other OS: connection
established and
communication in
progress
Error
Error or settings being
configured
Unlit
Switch
Status LED
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
