Citizen CLP-2001, User Manual

Page: 27 / 75

2-3
2.2 LCD/LED Indications and Adjustment Controls
1) LCD
The eight-character LCD screen displays the current printer status,
configuration settings, or an error message.
2) LEDs
Power: Lights when the power is tuned ON.
Error: Lights or blinks when an error occurs.
3) Adjustment controls
The three adjustment controls are used to adjust the paper gap
(transparent type) sensor sensitivity, black line (reflective type)
sensor sensitivity, and LCD contrast.
2.3 Normal Operating Mode
When the power is turned on, the printer enters the normal operating
mode. The control keys function as follows:
Pause key
Temporarily pauses printing. "Pause" is displayed on the LCD
screen. If pressed during printing, printing will stop after the current
label is printed. Press the Pause key again to resume printing.
Feed key
Advance to the top of the next label. When using continuous paper,
make sure the Sensor selection is set to ContinuP or a Paper error
will result.
Stop key
With this key, the operator can stop and cancel the current print job.
Pressing the Stop key during printing stops the printing immediately.
Pressing the Stop key again cancels the print job. If pressed when
the Error LED is illuminated, the error will be cleared and the printer
will pause. But if the error is not cleared, the Error LED will remain
illuminated.