Citizen CL-E321, User Manual

Page: 49 / 101

49
— —
3.4 Adjusting Media Sensor Positions
This section describes the procedure to adjust sensors when loading media. Transmis-
sive and reflective sensors can be used for the media sensors.
The printer comes from the factory equipped with a transmissive sensor. The media
sensor must be replaced with a reflective sensor for certain types of media.
Refer to 7.1 Sensor Adjustment Mode
Range of Paper Sensor Adjustment
The following figure illustrates the range of media sensor adjustment.
Left fixed media guide
118 mm (Max. media width)
(Moval scope of transport sensor)
6.0 to 26.0 mm
(Moval scope of reflective sensor)
6.0 to 74.0 mm
Dimension of
media feed
2.5 mm
Left margin
CL-E321:11.5 mm
CL-E331:10.5 mm
Right margin
CL-E321:104.0 mm
CL-E331:105.0 mm
Printable area