- Eng 10 -
English
Español
REMOVING THE BATTERIES
• When the icon
is displayed or nothing appears in the display, replace the old
batteries with four new ones. All four batteries should be changed at once.
• Adjust the clock after changing the batteries.
• The data stored in the memory is not deleted by changing the batteries.
• Do not use rechargeable batteries.
• Do not use alkaline (LR6) and manganese (R6P) batteries together.
• Batteries included are for demonstration purposes only. Battery life may be
shorter than specified.
• When disposing of used batteries, comply with governmental regulations or
environmental public institution’s rules that apply in your country/area.
TIME ADJUSTMENT
Setting the clock enables measurements to be accurately recorded.
The monitor can record the date and time of measurement as well as the
measurement results. Be sure to set the clock after inserting the batteries.
1
When you install the batteries for the first time,
the monitor will display time and date by turns.
2
Press and hold both the “ START/STOP” switch
and the “
MEMORY” switch for approximately
two seconds, a beep is heard and the “month”
indicator blinks at first.
3
Press the “
MEMORY” switch to adjust the
“month”.
Press the “
MEMORY” switch to increase
the number by one. Press the “ START/STOP”
switch to confirm the setting. The “month” is set and
the “day” indicator blinks.
* You can fast-forward the numbers in display by
pressing and holding the
MEMORY switch.
00̲CHU305̲USA.indb Eng-10
00̲CHU305̲USA.indb Eng-10
2015/01/13 19:53:17
2015/01/13 19:53:17
