- Eng 11 -
English
Español
Français
Py
ɫɫɤɢɣ
Ǒ¡Ûȣ
5
The measurement results are displayed.
• Once measurement is complete, the
cuff deflates and the measurement
results (systolic/diastolic blood pressure
values, pulse) are displayed.
* Systolic/diastolic blood pressure values
and pulse are displayed alternately.
* Provided there is no error in the measurement
results, they are stored automatically.
6
Finishing measurement.
Hypertension Classification lndicator
• Press the “ START/STOP” switch to turn the monitor off.
• After taking the blood pressure measurement, pressing the “ START/STOP”
switch will turn the monitor off. However, if you do not press the switch, the
monitor’s Auto OFF function will automatically turn the monitor off after 1 minute.
Irregular Heartbeat Indicator
If an irregular heartbeat is detected during measurement, the Irregular
Heartbeat (IHB) Indicator is displayed after measurement is completed.
There are 2 conditions under which the signal of IHB will be displayed:
1) The coefficient of variation (CV) of pulse period > 25%
2) The difference of adjacent pulse period 0.14s, and the number of such
pulse takes more than 53 percentage of the total number of pulse.
• Measurement may not be correct if your heartbeat fluctuates greatly during measurement.
If the Irregular Heartbeat (IHB) Indicator is displayed, measure your blood pressure again.
Caution
If the Irregular Heartbeat (IHB) Indicator appears frequently, you
are advised to consult a doctor about your health condition.
Hypertension Classi
Þ
cation Indicator
The measured blood pressure value is displayed according to the WHO standards.
(
See page 2)
Normal
Optimal
High-Normal
Grade 1 Hypertension (mild)
Grade 2 Hypertension (moderate)
Grade 3 Hypertension (severe)
Systolic
(mmHg)
DIASTOLIC
(mmHg)
180
160
140
130
120
80
85
90
100
110
00̲CHU304̲All.indb Eng-11
2015/06/02 11:00:52