Precautions for use
• If you suffer from heart disease, high blood pressure or other cir-
culatory disease, please consult your doctor first.
• If you feel abnormal pressure of the cuff during use or any other
irregularity, reduce the pressure by immediately switching off the
power or removing the batteries and consult the sales outlet where
purchased.
• If you think the measured value is abnormal or if measuring makes
you feel unwell, discontinue use and consult your doctor.
• Measurement of blood pressure may not be possible for someone
with a weak pulse or arrhythmia.
• Congestion, swelling, etc. may occur in some people.
• If blood pressure is measured repeatedly, an accurate result will
not be achieved. An interval of about 10 minutes should be al-
lowed.
• The memory is erased if the batteries are removed for replace-
ment, etc. and a record should be kept of any necessary data.
Precautions for maintenance
• Do NOT store the blood pressure monitor where it will be exposed
to direct sunlight, high temperature (over 60˚C), low temperature
(below –20˚C), high relative humidity (over 95%) or in a dusty
place.
• Do NOT expose the blood pressure monitor to under force or vi-
bration, or drop it.
• Remove the battery/batteries when not in use for a long period.
• Do NOT disassemble the apparatus.
• Do NOT bend the cuff or air hose unnecessarily.
• NEVER wipe the blood pressure monitor with thinner or benzene,
as they may damage it.
• When the monitor is very dirty, wipe it clean with a cloth moist-
ened with Sterilizing alcohol or a neutral detergent, and then wipe
it with a dry cloth. Do NOT use thinner or benzene.
Nature and frequency of maintenance:
This products is designed for use over an extended period of time;
however, it is generally recommended that it be inspected every two
years to ensure proper function and performance.
Protect the nature environment:
Please help protect natural environment by respecting national and/
or local recycling regulations when disposing of the batteries and
the products at the end of their useful lives.
Reference European standard:
This products complies with EC instructions 93/42/EEC (Medical
Device Directive) and with the following standards: EN 1060-1 : 1995
“Noninvasive Sphygmomanometers, Part 1 General Requirements”
and EN 1060-3 : 1997 “Noninvasive Sphygmomanometers, Part 3
Supplementary Requirements for Electromechanical Blood-Pressure
Measuring Systems”.
PRECAUTION FOR USE AND MAINTENANCE
Manufacturer:
Name:
Premier Precision Ltd.
Address:
Block E, G-H, 6
th
floor,
Phase 2, Yip Fat Factory Building,
73-75 Hoi Yuen Road,
Kwun Tong, Kowloon, Hong Kong
European Representative:
Name:
WvW elektronische Geräte Vertrieb GmbH.
Address:
Robert-Koch-Straße 20,
D-80538 München,
GERMANY
-
Eng 4
-