CBM-290/291 Service Manual
-
7 -
CITIZEN
4. Remove a base plate assembly.
(1) Remove an E-ring from a
shaft.
(2) Pull out the shaft.
(3) Pushing a lever inside,
pull out the base plate
assembly to this side.
·
Remove a paper guide from the base
plate assembly.
(1) Pull the paper guide to this side.
(2) Directing this side of the paper
guide upward, pull it out.
·
Remove a paper roller from the base
plate assembly.
(1) Using radio pliers, etc., pull out
parallel pins from the paper
roller.
(2) Remove the paper roller.
·
Remove an operation panel block
from a base plate.
(1) Using the Phillips screwdriver,
remove screws(PHT, M2.6 x 6)
used to secure the operation
panel block.
(2) Remove the operation panel block
from the base plate.
