• Each time button
A
is pressed when SUMMER is blinking, the summer time
setting will alternatively switch on (ON) or (OFF).
• The seconds will return to 00 and start again if button
A
is pressed.(Moreover,
if the seconds are between 30 and 59, the minutes will increase by 1.)
• 12-hour/24-hour system will alternately switch, each time button
A
is pressed.
(5) Press button
M
to return to normal display.
* After the summer time setting is switched ON, “SUMMER” and a time one hour
ahead of the regular time (the time when the summer time setting was OFF)
will be displayed. (This only applies to cities with summer time settings ON.)
* Be careful to set AM and PM correctly in 12-hour system.
* The year can be set from 2000 to 2099. (The year is only displayed at time of
adjustment.)
* Setting the year, month and day automatically sets the day of the week.
* If a non-existent date (for example, February 30) is set, the first day of the next
month is displayed automatically by returning to the normal display.
* This watch has an automatic calendar, so it is not necessary to make
adjustments for the ends of months, even in leap years.
13
C. Adjusting the time and calendar
If the time and calendar settings for any of the 30 cities or the UTC are adjusted,
those for all of the other cities will automatically be adjusted.
(1) Display the adjusting city.
(2) Press button
B
continuously for more
than 2 seconds in time or
calendar/temperature display. It will then
become possible to adjust the figures.
The blinking figures can be adjusted.
(3) Each time button
B
is pressed, the
blinking figures will change according to
the following sequence: summer time
c
second
c
minute
c
hour
c
12-hour/
24-hour
c
month
c
day
c
year.
(4) Press button
A
to adjust the figures. By
continuously pressing button
A
, the
figures change quickly.
12
AM
MODE
SET
AL-2
CHR
TMR
AL-1
TME
60
50
40
30
20
1
0
0
-10
A
B
[Normal time display]
City
Seconds
Temperature
Hour, minute
