6. ALARM 1 & 2 MODES
Alarm 1 and Alarm 2 differ only in the sounds they make. They are used and set
in exactly the same way. When the alarm is set (ON) once, it sounds for 20
seconds same time everyday. The alarm sounds stop by pressing any button.
A. How to set the alarms
When you set an alarm time for one city, the
same alarm time will automatically be set
for every other city.
(1) Press button
B
to display the alarm
setting city .
(2) Press button
B
continuously for more
than 2 seconds. The “Hours” will blink.
(3) Press button
A
to set the “Hours”. By
continuously pressing button
A
, the
figures change quickly.
17
AM
MODE
60
SAT
SET
OFF
50
40
THU
30
20
TUE
1
0
0
SUN
-10
SET
AL-2
CHR
TMR
AL-1
TME
B
A
A. How to set the zone
(1) Press button
B
to display the zone setting city.
(2) Press button
B
continuously for more than 2 seconds. In the graphic display,
SET (display) or OFF (non-display) will blink.
(3) Press button
A
and select SET or OFF for the displayed city.
(4) Press button
B
. “SUMMER” and ON or OFF will blink.
(5) Press button
A
and select ON or OFF for the summer time setting.
• If you wish to input settings for other cities, press button
B
again. The watch
will enter the adjustment mode for the next city. Then carry out, in order, the
same steps, selecting SET (display) or OFF (non-display) and a summer
time setting.
(6) After completing the settings, press button
M
to return to normal display.
* If the watch is left in the adjustment mode for approximately 2 minutes, it will
automatically return to normal display (the city blinks).
* If button
M
is pressed in adjustment mode, the watch will immediately return to
normal display.
16
[Normal alarm
setting display (ON)]
City (blinking)
ON or OFF
Alarm time (Hour, minute)
