7
6
<Setting the Time>
(1)Pull the crown out to the time correction position (2nd position) so that the second
hand stops at the 0 second position.
(2)Turn the crown to set the time.
*The date changes at 12:00 AM. Set the time while being careful not to mistake AM
and PM.
(3)Push the crown in to the normal position in synchronization with a telephone time
service or other official time service.
<Setting the Date>
(1)Pull the crown out to the date correction position (1st position).
(2)Turn the crown to set the date.
Turning the crown towards you (counter-clockwise) advances the date by one day.
The date will not move if the crown is turned in the opposite direction (clockwise).
(3)Return the crown to the normal position.
*Do not attempt to set the date between the hours of 9:00 PM and 1:00 AM. Setting
the date during this time may not result in the date changing on the following day.
* If the crown is of the screw-tightened type, set the time and date after first loosening
the screw. Retighten the screw after the time and date have been set.
3. Setting the Time and Date
If the watch stops or the second hand moves at two second intervals when setting
the time, charge the watch by referring to Section 6 entitled, “Charging Procedure”
to return the watch to the normal 1-second interval movement before attempting to
set the time and date.
7
60
45
30
15
24
20
16
12
8
4
Hours
24 hour hand
Seconds
Minutes
Date correction (1st) position
Crown
Time correction (2nd) position
Normal position
Summary of Contents for B51
Page 1: ...A C B ...
