CALL CONFERENCING
When the intercom call is established,
on the initiating handset {in this case is
Handset (1)}, pressing the [Int.] key can
switch between the intercom talk and
exterior-line talk.
LINE 00 : 00 : 09
INTC ON HOLD
MUTE
A0073108
39
After the initiating handset being switched
to ‘INTC’ (intercom) call, press the [CONF]
key on the initiating handset can talk with
the two parties (exterior-line party, and
intercom party) simultaneously, which is
the conference mode.
CONF 00 : 00 : 23
LINE
MUTE EXIT
In conference mode, press [Int.] key on
the initiating handset can also switch
between the two parties, and press
[CONF] key during intercom talk can
return to conference mode again.
LINE 00 : 01 : 07
INTC ON HOLD
MUTE
On any handset, pressing
or [EXIT]
can retreat from the current conversation
and return to standby mode> The other
handset will continue the exterior-line
call.
LINE 00 : 02 : 48
MUTE DIR.
To end the call, make sure that both
handsets have quit.
Note: If your handset has already retreated from the conversation; you can still join
in to the conversation again by following the procedures stated on Page 38.
