Citel EDAC, Installation Manual

Page: 54 / 56

EDAC Installation Guide 512-1090-001, Revision K0
Page 54 of 56
Regulatory
The EDAC meets the requirements of the EMC directive 89/336/EEC (CE Marking)
which include the standards for safety, emissions and immunity shown in Table 18.
Table 19. Regulatory Compliance
TEST SPECIFICATION PROCEDURE
Safety UL 1459
Safety CSA 22.2
Conducted Emissions, Powerline 230V EN 55022:1994 CISPR 22, Class A;
FCC Part 15
Radiated Emissions, Electric 230V EN 55022:1994 CISPR 22, Class A;
FCC Part 15
Electrostatic Discharge (ESD) Immunity EN 50082-1:1992 IEC 801-2:1991
Radiated Immunity, Electric EN 50082-1:1992 IEC 801-3:1984
(1988)
Electrically Fast Transient (EFT) Immunity EN 50082-1:1992 IEC 801-4:1988
(1990)

Safety testing was completed in July 1994.

Emissions testing was completed in August 1994.

Emissions testing was repeated in August 1996 and December 1997.

Immunity testing was completed in August 1996.

Compliance applies to EDAC product revisions as shown below. Note that CE
compatibility applies only to later revisions for base units and port cards.
PART SAFETY UL 1459 /
CSA 22.2
EMISSIONS EN
55022
IMMUNITY EN
50082
500-1090-001 Base
Unit All Revisions All Revisions Revisions K or later
only
300-3030-001 Port
Card All Revisions All Revisions Revisions M or later
only
300-3030-002 NE1
Port Card All Revisions All Revisions All Revisions
300-3030-003
Aspect Port Card All Revisions All Revisions All Revisions
VENDOR TEST RESULTS/REPORT
Lucent Technologies System Interoperability SIL Doc No. MY09-98