4
3. Description of the LITTLE BLIZZARD® XT
The LITTLE BLIZZARD® XT is CITC’s most popular evaporating snow effect product.
Insulated for quietness, you can have optional soundproofing in the SP (soundproof)
model. The unit incorporates a volume control to adjust pump output and flake size, and
also a two-speed fan control. It can run continuously without overheating. Flakes fly 15-
20 feet. A remote with 25ft (7.6m) cable is included, which controls On/Off and fluid pump
volume. 5-pin DMX comes standard in this model.
4.
Safety instructions
WARNING: Read and understand all labels and operating instructions
before attempting installation.
Never open the machine as this could void your warranty!
Risk of electrical shock-
This device is supplied with a grounding conductor. To reduce
risk of electrical shock, connect only to properly grounded, grounding type receptacles.
Never remove the third prong from the plug.
This machine requires a 100V/15 Amp circuit. The LITTLE BLIZZARD® XT has a 10amp
slo-blo fuse on the 100v model. During operation this circuit should be dedicated to the
LITTLE BLIZZARD® XT. If you have any doubts about the capacity or grounding of your
existing circuits, consult a qualified electrician.
Be sure area around snow machine is dry before applying electrical power.
Make sure that your unit is pointed in a direction that leaves at least a 10ft (3m) open
area out in front. Place the front of the machine away from direct contact with electrical
instruments and people.
Fluid is very slippery when spilled. Care in keeping any drips or spills cleaned up is
necessary.
