7
o
OFF:
No line voltage present.
GREEN / DMX:
o
ON:
DMX-512 signal present.
o
OFF:
No DMX-512 signal present.
BLUE / RELAY:
o
ON:
The switch is active and line voltage is present at the “POWER OUT” outlet.
o
OFF:
The
switch is inactive and line voltage is not present at the “POWER OUT”
outlet.
5.8
Troubleshooting
Problem:
Solution:
None of the indicator lights are illuminated. -Check power.
Indicator lights illuminate, but there is no
power to the outlet.
-Check fuse.
-Connected device must be turned on.
The power light is blinking.
-Incorrect voltage, unplug immediately.
Power light illuminated, but no DMX light.
-Check DMX signal.
DMX light illuminated, but no Relay light.
-Check DMX address.
-The value of the assigned DMX channel
must be 128-255 (50%-100%) to operate.
6. Technical Data
7. Limited Warranty Conditions
1.
Subject to the following conditions we will repair any defect or fault in the unit
if it is caused by a proven factory fault and has been advised immediately
DMX FX-15
™ Switch Pack
P/N 250051 (120V)
P/N 250052 (230V)
Dimensions
4 ¼” x 4 7/16” x 2”
(10.8cm x 11.3cm x 5.1cm)
Weight w/ Power Cord
2 lb (
0.907kg
)
Included Accessories
Power Cord
– 120vac: IEC to NEMA 5-15
– 230vac: IEC to Euro, plus universal
plug adapter
Operating Temperature
32°F-122°F (0°C-50°C)
DMX Connectors
5 pin XLR
Assignable DMX Address
1 - 511
DMX Channels Used
1
Electrical Supply
120 VAC, 15A, 50/60 Hz
230 VAC, 8A, 50/60 Hz
Fuse
15A
– 125 VAC, 5mm x 20mm
8A
– 250 VAC, 5mm x 20mm
Limited Warranty
Rev. 08/24/2011
