background image

3. Description of the Bubble Buddy

TM 

 

The Bubble Buddy

TM

 produces a steady stream of small, uniform, 1” (2.5cm) bubbles. 

The size and uniformity of the bubbles, makes them unique and fun to watch. You can 
use the Bubble Buddy

TM

 with an optional Universal DMX Controller, or ask to substitute 

the Remote for the DMX controller. Use the long distance Director Jr. Fan

TM

 for 40’ (12m) 

launch of bubbles or the Director Fan

TM

 for 70’ (21m) distance.  The Bubble Buddy

TM

 

comes with a 25’ (7.6m) remote and cycle-timer.   

 

 

4.

 

Safety Instructions 

 

WARNING: Read and understand all labels and operating instructions 
before attempting installation. 

 

Never open the machine without disconnecting power lead first! 

Risk of electrical 

shock- 

This device is supplied with a grounding conductor. To reduce risk of electrical 

shock, connect only to properly grounded, grounding type receptacles. Never remove the 
third prong from the plug. 

Do not overfill your Bubble Buddy

TM

. Overfilling will cause the unit to leak, and present 

the danger of electric shock. 

Keep this device dry. 

Keep the Bubble Buddy

TM

 upright and level. 

Turn off or unplug when not in use. 

This machine is not waterproof or splash proof.  

No user serviceable parts inside. Refer to your dealer or other qualified service 
personnel. 

For indoor use only. Not designed for outdoor use. 

For adult use only. The Bubble Buddy

TM

 must be installed out of the reach of children. 

Never leave the unit running unattended. 

Never aim the output at open flames. 

Extended use in one location without a fan, will make all surfaces slippery. 

Position output of bubbles away from persons. 

Unplug the machine when refilling the liquid or cleaning the system. 

Do not transport with liquid. If the machine gets wet, do not use until it is completely dry. 

Do not store Bubble Buddy

TM

 in freezing conditions. 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for BUBBLE BUDDY













Reviews: