Cistermiser EasyflushEVO, Manual

Page: 9 / 24

Have a question? Call our customer support team on 0118 969 1611 cistermiser.co.uk | 9
NOTE:
Remove sticky label from
sensor lens before use.
NOTE:
Either Battery OR Mains can
be connected, not both.
Multiple power connections for Easyflush
EVO
If installing multiple Cistermiser products, the PSUC Multi Product Power Supply Unit is available as an
accessory. Contact Cistermiser for more details.
Multi product power supply unit
(Not supplied, contact Cistermiser
for further details). Suitable for
powering up to 10 units.
CAUTION:
Risk of electric shock.
Isolate supply before
working on wiring
6. Power Connections
Isolate mains power supply before proceeding. Mains wiring should be undertaken by a competent
person.
Battery Case – Open case and fit 4 x AA (LR-6) batteries. Use fittings provided or clip onto EVO Flush
Valve.
Mains Adaptor – Fasten on a panel in a dry location using screws or sticky pads provided. Connected the
un-terminated cable to a 50Hz 230V AV single phase supply via a 1A fused spur (not supplied).
(2) Connect battery pack OR mains
adaptor to IR Sensor unit
(2-way connector)
(1) Connect IR Sensor
unit to Flush Valve
(3-way connector)
NOTE:
Always connect Sensor to Flush
Valve before connecting
power.