Cissell MANCONS, Manual

Page: 6 / 29

Page 5
SAFETY PRECAUTIONS
Please read these warnings before operating or servicing machine.
CAUTION: This machine emits hot steam. To prevent burns, avoid contact with hot steam. Before
service machine, close steam supply valve and purge lines.
CAUTION: Shut off electrical supply before servicing to avoid electrical shock.
OPERATING INSTRUCTIONS
1. Machine can be operated from any side. Position foot switches at convenient location.
2. Place garment on form. Adjust shoulder form width by turning knob in either direction. The Mr.
Cissell form requires adjustment of the Waist, Hip and Lower control knobs. After adjusting lock
the controls by twisting the knobs clockwise.
3. Press the AIR foot switch to operate the blower for sizing the form bag. Size the bag by adjusting
the DAMPER CONTROL. Using the Control Panel, press the MODE SELECT until the AIR light
glows and press START/CANCEL to operate the blower, then proceed with sizing the bag.
4. Set the three control timers to the recommended settings:
Steaming: 6-9 seconds
Conditioning: 4-9 seconds
Drying: 12-16 seconds
These settings should be fine-tuned to the particular garment, steam pressure and ambient
conditions. The recommended cycle is the steam/air conditioning and the drying. The control will
power up in this cycle.
5. This machine has the ability to pre-steam a garment prior to the automatic finishing cycle. To
actuate this cycle, press the MODE SELECT pad until the PRE-STEAM LIGHT glows, then press
START. Using the foot switch, press PRE-STEAM.
6. If a cycle is operating, it can be cancelled at any time by pressing any foot switch or control panel
pads.
Control Panel