Page 9
Unpacking/General Installation (All Dryers)
This dryer is packed in a large (heavy-duty) protective wooden crate.
Upon arrival of the equipment, any damage in shipment should be reported to
the carrier immediately.
Upon determining permanent location of a unit, care should be taken in
movement and placement of equipment. To move dryer through doorways, you
may need to remove the top of the machine. Follow instructions for disas-
sembling.
See outline clearance diagrams for correct dimensions.
Remove all packing material such as: tape, manuals, skid, etc.
Check voltage and amperes on rating plate before installing the dryer.
Leveling: Use spirit level on top of dryer. The use of shims are acceptable for
this procedure.
IMPORTANT
Before installing or operating this dryer, thoroughly read the
owner's manual for correct instructions concerning electric
connections, exhaust ducting, gas piping, steam connections,
make-up air, etc.
IMPORTANT
Read the warnings in this manual.
IMPORTANT
Do not install this dryer in an area where it will be exposed to
water and/or weather.
IMPORTANT
Failure to follow these instructions and warnings may create a
safety hazard and may affect the warranty.
IMPORTANT
Follow all local codes.
IMPORTANT
If you have any installation questions, consult the factory
Service Department.
UNPACKING
GENERAL
INSTALLATION
(ALL DRYERS)
Summary of Contents for HD175
