Cissell DX4 CONTROLLER, Manual

Page: 31 / 36

31
4
Program development
Display information:
When the cycle is started, the remaining drying time (here 30) is displayed. For a
coin-operated dryer, the cool down time is included in the drying time. A drying
cycle of 30 minutes consists of a drying time of 28 minutes + 2 minutes of cool down
time.
When
" YES " is choosen in the setting menu under " FLS " , then the dry time and the
temperature are displayed alternately. When the temperature is indicated with
degrees " ° C" , then the symbol ( ° ) is displayed. When the temperature is indicated
for values, less than 100
°
F , then this symbol
"°
F
"
is displayed.
When the heating is activated, the decimal point lights up.
Temporary interruption or change of the drying cycle.
By opening the door, the cycle can be interrupted temporary in order to reload, to
check the drying level or to change the cycle. All functions stop, " D r " is blinking on
the display and all leds, next to the push buttons , are blinking as well. However, the
drying time keeps on counting down.
As soon as the door is closed, " STA " and the remaining cycle time are displayed
alternately. Now the cycle, or, if necessary another cycle, needs to be started again.
End of the drying time : change to cool down time.
When the drying time has come to an end (here 30 minutes), the cool down time is
automatically started (here 2 minutes). The user will not be informed of the start of
the cool down period.
Remark :
When a coin is inserted in the coin meter during the cycle (also during the cool down
period or when the door is opened), then this time will be added to the remaining
cycle time.
End of the drying cycle.
When the cool down time has come to an end, then the cycle is automatically ended
(here 28+ 2 = 30 minutes). " E n d " is displayed until the door is opened.
Select and start the
drying cycle
Push 1 of the 3 buttons shortly and release it in order to start 1 of the preprogrammed
drying programs (see setting menu).
Temperature Drying time Cool down time
Left button (blue) (40 ° C - 104 ° F) 30 min. 2 min.
Middle button (orange) (60 ° C - 140 ° F) 30 min. 2 min.
Right button (red) (80 ° C - 176 ° F) 30 min. 2 min.
The led, next to the selected push button, keeps on blinking for about 10 seconds.
During this time, the program can still be changed. Afterwards, the led keeps on
lighting up constantly.