Cisco WS-SVC-WISM2-1-K9, Installation And Verification Note

Page: 3 / 16

3
Catalyst 6500 Series Wireless Services Module 2 Installation and Verification Note
78-16318-01
Status LEDs
Six status LEDs indicate the operating states of the WiSM2 module. Table 1 describes the status LED
operation.
Table 1 Status LED Descriptions
LED Label Color Description
SYSTEM Green/Amber System Status:
•
During system power-up:
–
SYSTEM blinks amber.
–
ALARM is continuous amber.
• During system boot:
–
SYSTEM blinks green.
– ALARM is continuous amber.
•
After bootup:
–
SYSTEM is continuous green.
–
ALARM is off.
• During controller image upgrade:
–
SYSTEM is continuous green.
– ALARM blinks green.
•
System crash:
–
SYSTEM is continuous amber.
–
ALARM is off.
• Firmware Error:
–
SYSTEM is continuous amber.
– ALARM is continuous amber.
Note Power cycle the controller to clear the
firmware error.
• Internal Voltage Error:
–
SYSTEM blinks amber.
–
ALARM is continuous amber.
•
Temperature Error:
– SYSTEM is off.
–
ALARM blinks amber.
Note
Check for blocked air vents and fans on the
chassis.
ALARM