Cisco WRT150N User Manual Download Page 17

Page: 17 / 86

Chapter 5: Configuring the Wireless-N Home Router
How to Access the Web-based Utility

Wireless-N Home Router

Status

•

Router. This screen provides status information about the Router.

•

Local Network. This provides status information about the local network.

•

Wireless Network. This provides status information about the wireless network.

How to Access the Web-based Utility

To access the Web-based Utility of the Router, launch Internet Explorer or Netscape Navigator, and enter the
Router’s default IP address,

192.168.1.1

, in the

Address

field. Press the

Enter

key.

A screen will appear asking you for your User name and Password. Leave the

User Name

field blank. Enter

admin

in the

Password

field. Then click the

button.

Make the necessary changes through the Utility. When you have finished making changes to a screen, click the

Save Settings

button to save the changes, or click the

Cancel Changes

button to undo your changes. For

information on a tab, click

Help

The Setup Tab - Basic Setup

The

Basic Setup

screen is the first screen you see when you access the Web-based Utility.

Internet Setup

The Internet Setup section configures the Router for your Internet connection type. This information can be
obtained from your ISP.

Internet Connection Type

The Router supports six connection types: Automatic Configuration - DHCP, Static IP, PPPoE, PPTP, Telstra Cable,
and L2TP. Each

Basic Setup

screen and available features will differ depending on what kind of connection type

you select.

Automatic Configuration - DHCP

By default, the Router’s Internet Connection Type is set to

Automatic Configuration - DHCP

, and it should be

used only if your ISP supports DHCP or you are connecting through a dynamic IP address.

Figure 5-1: Router Login

Figure 5-2: Setup Tab - Basic Setup

(Automatic Configuration - DHCP)

NOTE:

Some of these connection types may not

be available in your area.

Summary of Contents for WRT150N























































































Search results

Summary of Contents for WRT150N

Reviews:

Related manuals for WRT150N

Brands by name

Popular brands

Cisco WRT150N, User Manual

Search results

Summary of Contents for WRT150N

Reviews:

Related manuals for WRT150N

Brands by name

Popular brands