10
Chapter 5: Setting Up the Wireless-G Range Expander
Overview
Wireless-G Range Expander
Chapter 5: Setting Up the Wireless-G Range Expander
Overview
The first part of this chapter explains how to configure the Range Expander. The remainder of the chapter
describes how to move the Range Expander to its final location.
Running the Setup Wizard
Now that you've placed the Range Expander within your wireless network, you are ready to begin setting it up.
This Setup Wizard will take you through all the steps necessary to configure the Range Expander.
1. Insert the Setup Wizard CD into your PC's CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome
screen should appear. If it does not, click the
Start
button and choose
Run
. In the field that
appears, enter
D:\setup.exe
(if “D” is the letter of your CD-ROM drive).
2. Click the
Setup
button to continue this Setup Wizard. Clicking the
User Guide
button opened this Guide. To
exit this Setup Wizard, click the
Exit
button.
3. Make sure your access point or wireless router is working properly before you continue with the Setup
Wizard. Click
Next
to continue or
Exit
to exit the Setup Wizard.
Figure 5-1: Setup Wizard’s Welcome Screen
NOTE:
You won’t need to use the Setup Wizard, if
you set up the Range Expander using the Auto
configuration button. The Auto configuration button
can be used to quickly set up the Range Expander if
you have security disabled on your wireless network.
Figure 5-2: Check Your Wireless Network
