show pagp
To display Port Aggregation Protocol (PAgP) channel-group information, use the
show pagp
command in
EXEC mode.
show pagp
[
channel-group-number
] {
counters| dual-active| internal| neighbor
}
Syntax Description
(Optional) Channel group number. The range is 1 to 128.
channel-group-number
Displays traffic information.
counters
Displays the dual-active status.
dual-active
Displays internal information.
internal
Displays neighbor information.
neighbor
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
You can enter any
show pagp
command to display the active channel-group information. To display the
nonactive information, enter the
show pagp
command with a channel-group number.
Examples
This is an example of output from the
show pagp 1 counters
command:
Controller>
show pagp 1 counters
Information
Flush
Port
Sent
Recv
Sent
Recv
----------------------------------------
Channel group: 1
Gi1/0/1
45
42
0
0
Gi1/0/2
45
41
0
0
This is an example of output from the
show pagp dual-active
command:
Controller>
show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Layer 2/3 Command Reference, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
52
OL-32323-01
Layer 2/3 Commands
show pagp
