Cisco Webex DX70 Administrator'S Manual Download Page 48

Page: 48 / 219

D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.

Cisco Webex DX70 and DX80

Administrator Guide

Camera LED

Status LED

The status LED is a circle around the power button.

The normal LED color is white. A red light indicates

hardware failure.

Normal operation (not standby):

Steady light.

In standby mode:

The LED pulsates slowly.

No network connection:

The LED repeatedly flashes twice.

During startup (boot):

The LED flashes.

Camera LED

The camera LED is just above the camera lens.

Incoming call:

The LED flashes.

In call:

Steady light.

Status LED around

the power button

Status LED around

the power button

Camera LED

LED indicators

Introduction

Configuration

Peripherals

Maintenance

Device settings

Appendices



Introduction

Summary of Contents for Webex DX70




























































































































































































































Search results

Summary of Contents for Webex DX70

Reviews:

Related manuals for Webex DX70

Brands by name

Popular brands

Cisco Webex DX70, Administrator'S Manual

Search results

Summary of Contents for Webex DX70

Reviews:

Related manuals for Webex DX70

Brands by name

Popular brands