Description
Default
Field Type Or
Choices
Field
Sets the time to delay the reboot attempt.
1 minute
1 minute
5 minutes
10 minutes
15 minutes
30 minutes
1 hours
2 hours
3 hours
4 hours
6 hours
8 hours
12 hours
Time to delay reboot
attempt for
Call Quality Settings App
Call quality settings are automatically set in the phone. However, if your support personnel directs you to
adjust a setting such as the Wi-Fi band or channels, you can do so with the
Call Quality Settings
app.
This is an OEMConfig app. To configure the app, your Enterprise Mobility Management (EMM) must support
the OEMConfig enhanced schema. If required, consult with your EMM support for assistance.
Note
By default, all Wi-Fi band options and band channels are enabled. You must enable at least one band and
channel or the phone loses connection and does not function.
Review the bands and channels in use at the intended location before you make any changes. If you select the
wrong band or channels, you may permanently disconnect phones from the network. Contact Cisco TAC if
incorrect band selection disables the phones. As a last resort, you may need to manually reset factory defaults
to the phones.
Caution
Related Topics
Access the Cisco App Settings on the Phone
, on page 65
Wi-Fi Information
The
Call Quality Settings
app displays information about the Wi-Fi access point connection to the phone.
This Wi-Fi information may help you to troubleshoot call quality issues.
Webex Wireless Phone 840 and 860 Administration Guide for Cisco Unified Communications Manager
116
Cisco App Configuration
Call Quality Settings App
