background image

4-7

Cisco VG350 Voice Gateway Hardware Installation Guide

OL-25970-01

Chapter 4      Installing the Cisco VG350 Voice Gateway

  Mounting Tools and Equipment

Mounting Tools and Equipment

Obtain the following tools and parts to install a Cisco VG350 Voice Gateway:

  •

Standard flat-blade screwdriver as required for attaching brackets to rack or wall

  •

Phillips screwdriver for attaching brackets to a Cisco VG350 Voice Gateway

  •

Mounting brackets and screws for 24-inch rack, if required:

  –

Four telco machine screws, for installing the chassis in a rack (use the screw size required by 
the rack)

  •

Screws and anchors for wall-mounting, if required

  –

Eight wood screws or other fasteners, for installing the chassis on a wall. An additional starter 
screw can be used to facilitate wall-mounting.

  •

ESD-preventive wrist strap

In addition, you might need the following external equipment:

  •

Console terminal or PC with terminal emulation software

  •

PC running terminal emulation software for administrative access 

  •

Modem for remote access

  •

Analog voice RJ-21 cable

  •

Ethernet switch

  •

Modem for remote configuration

Unpacking and Inspection

Do not unpack the Cisco VG350 until you are ready to install it. If the installation site is not ready, keep 
the chassis in its shipping container to prevent accidental damage. 

The Cisco VG350, cables, printed publications, and any optional equipment you ordered might be 
shipped in more than one container. When you unpack each shipping container, check the packing list 
to ensure that you received all the following items:

  •

Cisco VG350 Voice Gateway

  •

Power cord, 6-foot (1.8-meter)

  •

RJ-45-to-DB-25 adapter cable (labeled 

Console

)

  •

RJ-45-to-DB-9 adapter cable (labeled 

Auxiliary

)

  •

Rack-mounting brackets for 19-inch rack (one pair) with screws for attaching to chassis

  •

Chassis guard for wall-mounting applications

  •

Grounding lug and fasteners

  •

Read Me First

 for Cisco VG350 Voice Gateway

Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when 
installing or configuring your system, contact a customer service representative. (See the 

“Obtaining 

Documentation” section on page -xv

.)

Summary of Contents for VG350





























































Reviews: