14
Figure 13
WAN and Voice Connections
7
Powering On the Cisco VG224
Caution
Do not use AC and DC power at the same time
. If you do, the unit stops operating, and you must reboot it with
only a single power source.
Checklist for Power-On
You are ready to power on the Cisco VG224 if it meets these requirements:
•
The chassis is securely mounted.
•
Power and interface cables are connected.
Power-On Procedure
Perform this procedure to power on your Cisco VG224 and verify that it goes through its initialization and self-test. When this
is finished, the Cisco VG224 is ready to configure.
To power on the Cisco VG224, follow this procedure:
Step 1
Power on your terminal or PC, and configure it for 9600 bps, 8 data bits, 1 stop bit, and no parity.
Step 2
Move the Cisco VG224 power switch to the ON position.
Table 3
WAN and Voice Cable Selection
Port or Interface
Color or Type
Connected To
Cable
Analog voice FXS
RJ-21
Distribution panel
RJ-21-to-RJ-21 straight-through cable (not included)
1
RJ-21 cable (through a patch panel) to
central office
2
RJ-45 cable (through a patch panel) to central
office
Cisco VG224
Network
demarcation
95921
Distribution panel
2
1
VG224-24FXS
Summary of Contents for VG224 - Analog Phone Gateway
Page 19: ...19 ...
