Wall Mount
Quick Start
Rack Mount
Secure the left and right mounting ears
to either side of the router chassis using
the screws in Packet A
Lift and position the router in the rack.
Then secure the mounting ears to the
front posts of the rack using the screws
in Packet B.
Step
Step
1
2
PWR
DC 12V IN
PWR
SYS
0
1
2
3
4
CONSOLE
RESET
GPS
Insert two wall-mount screws in the wall
where you are mounting the router
(screws not provided). The screws must
align with the wall-mount holes on the
underside of the router chassis.
Align the wall-mount holes on the router's
underside to the screws in the wall, and
gently slide the chassis, from side to side
or up and down, onto the wall-mount screws.
Step
Step
1
2
See back for more information
Wall
Package Contents
Router chassis
USB console cable
Mounting ears, left and right
Mounting-ear screws (Packet A)
Rack-mount screws (Packet B)
AC power adapter and connectors
Quick Start document
For complete documentation, see
https://sdwan-docs.cisco.com/
Product_Documentation
Safety Standards
Before installing the routers or connecting it
to a power source, read the planning and
installation instructions for your hardware
platform at:
https://sdwan-docs.cisco.com/
Product_Documentation/vEdge_Routers
Failure to observe these safety warnings can
result in personal injury or death.
