3-6
Administrator Guide for Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
OL-6571-02
Chapter 3 Configuring Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
How to Configure Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
Step 4
To accept the settings, click
Submit
.
Step 5
Restart the IP-gateway server.
Verifying MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
Configuration
Step 1
To verify that Release 5.2.1 services are running, choose
Start
> Settings > Control Panel
from the
IP-gateway server; then, select
Services
.
Step 2
Make sure that the following services are running:
•
Cisco Unified MeetingPlace Gateway SIM
•
Cisco Unified MeetingPlace IP Gateway
Step 3
To verify that the IP-gateway server is logging in, telnet to the Cisco Unified MeetingPlace Audio Server
system.
Step 4
To verify that the IP-gateway server status is OK, enter
gwstatus
.
Note
It can take up to five minutes for
gwstatus
to update; therefore, any recent changes to the gateway may
not be reflected.
Step 5
Verify that you can access the Cisco Unified MeetingPlace Audio Server system by using a Cisco IP
Phone.
Step 6
Verify that you can access Cisco Unified MeetingPlace Audio Server system by using a PSTN phone.
H.323 Settings
Enabled
Yes
E.164 Address
Dialable number for the MeetingPlace H.323/SIP IPGW
H.323 ID
MeetingPlace
Gateway Port
1720
Gatekeeper Address
IP address of the H.323 Gatekeeper
Gatekeeper Port
1719
Use Gatekeeper
Yes
Table 3-4
Release 5.2.1 Configuration Settings for Use With an H.323 Gatekeeper
Field Name
Setting
