Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide
75
On the
APs
tab, select the desired access points then select
Add APs
.
Those access points will then reboot.
RF Profiles
RF Profiles can be created to specify which frequency bands, data rates, RRM settings, etc. a group of access points should use.
RF Profiles are applied to an AP group once created. See the AP Groups section for more info on AP Group configuration.
When creating an RF Profile, the
RF Profile Name
and
Radio Policy
must be defined.
Select 802.11a or 802.11b/g for the
Radio Policy
.
On the
802.11
tab, configure the data rates as desired.
Is recommended to enable 12 Mbps as
Mandatory
and 18-54 Mbps as
Supported
; however some environments may require 6
Mbps to be enabled as a mandatory (basic) rate.
Summary of Contents for UNIFIED 9971
