Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide
68
Individual access points can be configured to override the global setting to use dynamic channel and transmit power assignment
for either 5 or 2.4 GHz depending on which frequency band is to be utilized.
Other access points enabled can be enabled for Auto RF and workaround the access points that are statically configured.
This may be necessary if there is an intermittent interferer present in an area.
The channel width can be configured for 20 MHz or 40 MHz if using Cisco 802.11n Access Points.
It is recommended to use 40 MHz channels only if using 5 GHz.
Client Roaming
The Cisco Unified IP Phone 9971 does not utilize the RF parameters in the Client Roaming section of the Cisco Unified
Wireless LAN Controller as scanning and roaming is managed independently by the phone itself.
Call Admission Control
It is recommended to enable
Admission Control Mandatory
for
Voice
and configure the maximum bandwidth and reserved
roaming bandwidth percentages for either 5 or 2.4 GHz depending on which frequency band is to be utilized.
The maximum bandwidth default setting for voice is
75%
where
6%
of that bandwidth is reserved for roaming clients.
Roaming clients are not limited to using the reserved roaming bandwidth, but roaming bandwidth is to reserve some bandwidth
for roaming clients in case all other bandwidth is utilized.
If CAC is to be enabled, will want to ensure
Load-based CAC
is enabled, which is available for the Cisco Unified Wireless
LAN Controller, but not currently available on the Cisco Autonomous Access Point platform.
Load-based CAC
will account for non-TSPEC clients as well as other energy on the channel.
Enable
Traffic Stream Metrics (TSM)
.
SIP CAC can help ensure that downstream voice frames are prioritized correctly when a client does not support TSPEC.
Summary of Contents for UNIFIED 9971
