Internal Components
Figure 8: Inside View of the UCS B200 M4 Blade Server
Modular storage subsystem connector
2
SD card slots
1
DIMM slots
4
USB connector
An internal USB 2.0 port is supported.
A 16 GB USB drive
(UCS-USBFLSHB-16GB) is available
from Cisco. A clearance of 0.950
inches (24.1 mm) is required for the
USB device to be inserted and
removed.
3
CPU heat sink install guide pins
6
Front heat sink and CPU 1
5
CMOS battery
8
Rear heat sink and CPU 2
7
DIMM diagnostic LED button
10
Trusted Platform Module (TPM)
9
Adapter slot 2
12
Adapter slot 1
11
When the storage module is installed, the USB connector is underneath it. Use the small cutout opening
in the storage module to visually determine the location of the USB connector when you need to insert it.
Note
Cisco UCS B200 M4 Blade Server Installation and Service Note
15
Servicing a Blade Server
Internal Components
