Step 2
Gently slide the hard drive into the opening in the blade server until it seats into place.
Step 3
Push the hard drive lever into the closed position.
You can use Cisco UCS Manager to format and configure RAID services. For details, see the
Configuration
Guide
for the version of Cisco UCS Manager that you are using. The configuration guides are available at
the following URL:
http://www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_
guides_list.html
If you need to move a RAID cluster, see the
Cisco UCS Manager B-Series Troubleshooting Guide
.
Removing a Blade Server Cover
Procedure
Step 1
Press and hold the button down as shown in the figure below.
Step 2
While holding the back end of the cover, pull the cover back and then up.
Figure 6: Opening a Cisco UCS B200 M4 Blade Server
Cisco UCS B200 M4 Blade Server Installation and Service Note
13
Servicing a Blade Server
Removing a Blade Server Cover
