Cisco uBR904 Troubleshooting Tips Download Page 12

Page: 12 / 62

Troubleshooting Steps

Cisco IOS Release 12.0(3)T

Event 3—Obtain Upstream Parameters

The cable modem waits for an upstream channel descriptor (UCD) message from the headend
Cisco uBR7246. This is done to retrieve transmission parameters for the upstream channel.

508146.124 CMAC_LOG_STATE_CHANGE wait_ucd_state

508147.554 CMAC_LOG_UCD_MSG_RCVD 3

508147.558 CMAC_LOG_UCD_NEW_US_FREQUENCY 20000000

508147.558 CMAC_LOG_SLOT_SIZE_CHANGED 8

508147.622 CMAC_LOG_FOUND_US_CHANNEL 1

508147.624 CMAC_LOG_STATE_CHANGE wait_map_state

508148.058 CMAC_LOG_MAP_MSG_RCVD

508148.060 CMAC_LOG_INITIAL_RANGING_MINISLOTS 40

Event 4—Start Ranging for Power Adjustments

The ranging process adjusts the cable modem’s transmit power. The cable modem performs ranging
in two stages: ranging state 1 and ranging state 2.

The field

CMAC_LOG_POWER_LEVEL_IS

is the power level that the Cisco uBR7246 told the cable

modem to adjust to. The field

CMAC_LOG_RANGING_SUCCESS

indicates that the ranging adjustment was

successful.

508148.062 CMAC_LOG_STATE_CHANGE ranging_1_state

508148.064 CMAC_LOG_RANGING_OFFSET_SET_TO 9610

508148.066 CMAC_LOG_POWER_LEVEL_IS 28.0 dBmV (commanded)

508148.068 CMAC_LOG_STARTING_RANGING

508148.070 CMAC_LOG_RANGING_BACKOFF_SET 0

508148.072 CMAC_LOG_RNG_REQ_QUEUED 0

508148.562 CMAC_LOG_RNG_REQ_TRANSMITTED

508148.566 CMAC_LOG_RNG_RSP_MSG_RCVD

508148.568 CMAC_LOG_RNG_RSP_SID_ASSIGNED 2

508148.570 CMAC_LOG_ADJUST_RANGING_OFFSET 2408

508148.572 CMAC_LOG_RANGING_OFFSET_SET_TO 12018

508148.574 CMAC_LOG_ADJUST_TX_POWER 20

508148.576 CMAC_LOG_POWER_LEVEL_IS 33.0 dBmV (commanded)

508148.578 CMAC_LOG_STATE_CHANGE ranging_2_state

508148.580 CMAC_LOG_RNG_REQ_QUEUED 2

508155.820 CMAC_LOG_RNG_REQ_TRANSMITTED

508155.824 CMAC_LOG_RNG_RSP_MSG_RCVD

508155.826 CMAC_LOG_ADJUST_RANGING_OFFSET -64

508155.826 CMAC_LOG_RANGING_OFFSET_SET_TO 11954

508155.828 CMAC_LOG_RANGING_CONTINUE

508165.892 CMAC_LOG_RNG_REQ_TRANSMITTED

508165.894 CMAC_LOG_RNG_RSP_MSG_RCVD

508165.896 CMAC_LOG_ADJUST_TX_POWER -9

508165.898 CMAC_LOG_POWER_LEVEL_IS 31.0 dBmV (commanded)

508165.900 CMAC_LOG_RANGING_CONTINUE

508175.962 CMAC_LOG_RNG_REQ_TRANSMITTED

508175.964 CMAC_LOG_RNG_RSP_MSG_RCVD

508175.966 CMAC_LOG_RANGING_SUCCESS

Summary of Contents for uBR904































































Search results

Summary of Contents for uBR904

Reviews:

Related manuals for uBR904

Brands by name

Popular brands

Cisco uBR904, Troubleshooting Tips

Search results

Summary of Contents for uBR904

Reviews:

Related manuals for uBR904

Brands by name

Popular brands