4-6
Cisco uBR7225VXR Universal Broadband Router Hardware Installation Guide
OL-17309-01
Chapter 4 Connecting the Cisco uBR7225VXR Router to the Cable Headend
Measuring the Downstream RF Signal
Figure 4-3
Viewing the Downstream IF Signal on a Spectrum Analyzer
Step 5
Measure the IF signal using the channel power option on your spectrum analyzer. Set your channel
spacing and your channel bandwidth to 6 MHz. Your analyzer should display a signal similar to the one
shown in
Figure 4-4
.
Figure 4-4
Measuring the IF Channel Power
Note
The IF channel power in
Figure 4-4
is +34.23 dBmV, as displayed on the spectrum analyzer.
Step 6
Select the video averaging feature. Your spectrum analyzer should display a signal similar to the one
shown in
Figure 4-5
.
