2-20
Cisco TelePresence System TX1300 47 Installation, First-Time Setup, and Field-Replaceable Unit Guide
OL-24695-01
Chapter 2 Assembling the Cisco TelePresence System TX1300 47—Freestanding Version
Connecting the Cisco TelePresence Touch 12 Device
Connecting the Cisco TelePresence Touch 12 Device
Connect the CTT 12 by performing the following tasks:
•
Connect one side of the Ethernet cable that is supplied with the CTT 12 to the “Network Uplink
Input RJ-45” port on the rear of the device.
•
Connect the other side of the Ethernet cable to the “To Phone” connection on the system codec.
Figure 2-17
shows the connections on the Cisco TelePresence Touch 12. See
Figure 2-12
for information
about the codec connections.
Figure 2-17
Connections On the Cisco TelePresence Touch 12
209825
Cisco Touch
Codec
