Cisco Quad Camera, Precision 60, SpeakerTrack 60 and PTZ-12 Camera
D15296.10 Cisco Quad Camera, Precision 60, SpeakerTrack 60, and PTZ-12 Camera SEPTEMBER 2019.
Copyright © 2019 Cisco Systems, Inc. All rights reserved.
8
Camera guide
SpeakerTrack 60 Camera
Video
• Two HDMI cables from the cameras.
Power
• Power rating: 12 V
DC
, 6.5 A.
• Always use the provided cables and power adapter.
• Power out to cameras (internal connection).
Ethernet
Two Ethernet ports are used for the internal camera control con-
nection. The third connector is used for connecting the codec.
Use Ethernet cable only. Do not connect a serial VISCA
cable to the Ethernet port on the SpeakerTrack 60 camera,
as this will cause severe damage to the camera.
Microphone connectors
The right set is used for internal connection to the microphone
panel. The left set of connectors is intended for future use.
Kensington lock
The Kensington lock may be used to prevent the camera from
being moved from its place or to prevent theft.
For more information about the SpeakerTrack 60 setup, refer to
the following installation guides:
Cisco TelePresence SpeakerTrack 60 installation guide
Cisco Webex Codec Pro installation guide
Cisco TelePresence SX80 Installation Guide
During a call, the LED is lit on the camera
that is currently sending the live picture.
The status LED is continuously lit when
power is On.
Power out to
cameras
Ethernet
RJ45
codec
Ethernet
RJ45
camera control
Additional
connectors*
Power in
USB*
Microphones
on panel
Chinch
connectors*
* For future use
Contents
Introduction
Physical interface
Connecting to a codec
Appendix
Factory reset
Physical interface
