14
D1510401 User Guide
Cisco Collaborate Desk DX80
Produced: April 2014, All contents © 2014
Cisco Systems, Inc. All rights reserved.
EFT Draft 1—Cisco Confidential—Do Not Distribute
You can hold and resume calls. This
can be used to call someone while a
call already is active.
When you put a call on hold, the
Hold icon appears on the right in the
call information area. With a shared
line, when another phone places a
call on hold, the phone displays the
Remote Hold
icon.
If the
Hold Reversion
feature is
enabled for your phone, a call that
you put on hold reverts to ringing
after a certain time. The reverting
call remains on hold until you
resume it or until
Hold Reversion
times out. Your phone indicates the
presence of a reverting call by the
following actions:
•
Alerts you at intervals with a single
ring (or flash or beep, depending
on your phone line setting).
•
Briefly displays a
Hold Reversion
message in the status bar at the
bottom of the phone screen.
•
Displays the animated
Hold
Reversion
icon next to the caller ID
for the held call.
About Hold and Resume
Common Call Tasks
Hold and Resume
In a call, tap
Hold
as outlined.
Your screen will now look as shown, and music will
normally be played while the call remains on hold. To
resume the call, tap
Resume
, as outlined.
