Router#
show busyout
slot-number
Step 4
You may use the clear port command to immediately disable active calls on the universal
port card. Use the show controller command to show the universal port card associated with the
T1 or E1 DFC.
Router#
show controller t1/e1
slot-number/control-number
timeslot
timeslot-
number
Router#
clear port
slot-number/port number
Note
The clear port command only applies to the universal port DFC.
Step 5
Verify that the OIR/MAINT LED is off; this indicates that the DFC is offline and ready
to be removed.
Note
The OK/MAINT LED is green before you enter the busyout command. After you enter the
busyout command, the LED changes to yellow. The LED turns off after all calls are
disconnected and resources are taken out of service, indicating that busyout is complete.
Step 6
Attach an ESD-preventive wrist strap.
Warning
Do not work on the system or connect or disconnect cables during periods of lightning
activity. To see translations of the warnings that appear in this publication, refer to the
Regulatory Compliance and Safety Information
document that accompanied this device.
Step 7
Disconnect all interface cables from the DFC and secure them out of the way.
Summary of Contents for T3
Page 9: ... Cabling Specifications ...
