Quick Start Guide
Product Graphic
Here
REVIEW DRAFT—CISCO CONFIDENTIAL
Cisco Small Business Pro
SA520, SA520W, and SA540 Security Appliances
Package Contents
•
SA5XX Series Security Appliance
•
Mounting Hardware
•
Rubber Feet for Desktop Mounting
•
Quick Start Guide
•
SA5XX Series CD
Product Overview
Thank you for choosing the Cisco Small Business Pro SA5XX Series security
appliance. The SA5XX series is a family of three security appliances designed
to provide enterprise grade security gateway solutions with VPN support, with
802.11n Access Point capabilities Not (supported on all models). These
devices allow you to easily setup VPN tunnels and quickly connect to wireless
11n clients through secure or open links. The GUI provides all the capabilities
for novice and advanced users to administer this secure and stable security
appliance.
This guide is designed to familiarize you with the general layout of the device,
and how to begin installing them in a standard configuration. Your particular
model may not have all of the features or functionality described in this guide.
For more detailed information on the individual security appliance, see the
SA5XX Series Administration Guide
.
Front Panel
The LEDs and Status Indicators are located on the front panel of the security
appliance.
SA-520 Front Panel
SA-540 Front Panel
RESET—Push the Reset button to reboot the device. Press and hold for 5
seconds to restore the factory default settings.
SYSTEM
•
DIAG—When lit, indicates that the appliance is booting. When off, the
appliance has booted properly.
1
POWER—(Green) This LED lights up and remains lit when the appliance is
powered on.
DMZ—(Green) This LED lights up and remains lit when the the optional port is
configured as DMZ.
WAN—(Green or Orange) This LED indicates either 100Mbps or 1000Mbps
speed on the WAN port.
WLAN—(Green) This LED indicates Wireless status. There is one LED for one
for 2.4GHz mode and one for the other one for 5GHz mode.
LAN Ports 1-4—The security appliance is equipped with auto-sensing,
Ethernet (802.3) network ports, which use RJ-45 connectors. The Fast Ethernet
ports support network speeds of 10 Mbps, 100 Mbps, or 1000 Mbps. Each
Green LED lights up when a connection is made through its corresponding
port. It flashes when the corresponding port is active. Each Orange LED lights
up when a high speed (1000Mbps) connection is made through its
corresponding port. It flashes when the corresponding port is active.
Back Panel
The back panel is where you will connect the security appliance to power, LAN
Ports, the WAN.A USB port is also available.
SA-520 Back Panel
SA-540 Back Panel
SA-520W Back Panel
POWER—The power port is where you will connect the security appliance to
power using the supplied cable.
OPTIONAL—The OPTIONAL port is where you will connect the security
appliance to the WAN/LAN/DMZ port.
WAN—The WAN port is where you will connect the security appliance to
uplink devices using an RJ-45 cable.
POWER SWITCH
—Use this switch to power the security appliance on or off.
USB—The USB port is where you will connect the security appliance to a USB
device.
Side Panels
The side panels have holes for attaching mounting brackets. See the
Placement Options section for details.
Placement Options
The security appliance can be placed on a desktop, a rack, or mounted on a
wall. If you choose the desktop option, install the four rubber feet (included) on
the bottom of the security appliance.
2
Wall Mount with Mounting Screws
S
TEP
1
Insert two 17 mm screws, with anchors, into the wall 150 mm apart.
S
TEP
2
Position the unit so that the wall-mount slots are over the two screws.
Slide the unit down until the screws fit snugly into the wall-mount slots.
