33
Cisco Smart+Connected Video Door Station Reference Guide
OL-27367-01
Installing the Cisco Video Door Station
Figure 20
Contact/Relay Locations
Procedure
Step 1
To attach the wires to the contacts or relay, select one of the large bottom-row holes (see
notice that the top row holes are smaller than the bottom-row holes).
Step 2
Using a small flat screwdriver, insert the screwdriver into the slot on the small block that sits between
the two rows of holes adjacent to the port and push down firmly. The block will depress.
Step 3
Insert the wire. Ensure that the wire inserts all the way into the hole.
Step 4
Release the screwdriver.
Example Wiring
Figure 21
Relay Port: Normally Open (e.g., Doorbell)
