manualshive.com logo in svg

Cisco SCH-IO-EXT-8, Reference Manual

Share
Download
Cisco SCH-IO-EXT-8 Reference Manual Download Page 3

 

3

Cisco Smart+Connected I/O Extender Reference Guide

OL-27368-01

  Requirements

Requirements

Prior to installing this product, ensure that: Ethernet network wiring is in installed and functioning. 

Mounting Options 

Before installing the Cisco I/O Extender, mount the device using one of the following options.

  •

Place it on a flat surface 

  •

Mount it on the wall 

  •

Mount it on a rack—front facing or back facing 

Flat Surface

Place the device on a flat surface, and connect the devices. 

Mount on a Wall (New Construction)

The device can mount to a 2-gang wall box. 

  •

Mount the 2-gang wall box. 

  •

Hang the device on the two (2) screws in the wall box front side up. 

  •

Connect the devices at the bottom of the device. 

Mount in a Rack

Front of Rack 

Step 1

Screw the rack mount ears to the front of the device. 

Step 2

Screw the device to the front of the rack. 

Back of Rack 

Step 1

Screw the rack mount ears to the back of the device. 

Step 2

Screw the device to the rails on the rack. If your rack has rear rails, this may be your best option. 

Summary of Contents for SCH-IO-EXT-8















Reviews:

No comments

Brands by name

Popular brands

Load more brands