Cisco SCE8000 GBE, Installation Manual

Page: 4 / 50

4
System Installation Overview
Figure 1 shows the order of in which the Cisco Service Control solution must be installed.
Figure 1 Installing the Complete Cisco Service Control Solution
To install the complete Cisco Service Control solution, complete these steps:
Step 1 Install the Cisco SCE platform (see the “Installing the Cisco SCE 8000 Platform” section on page 11 ).
This task includes:
•
Installation in the rack
• Initial configuration by using a local console
• Cabling management and line ports
Step 2
Install the Subscriber Manager (see the “Installing the Subscriber Manager” section on page 13 ).
This task includes:
•
Preliminary configuration (memory settings and configuration file.)
• Installing the SCMS Subscriber Manager software
•
Adding a user for Proprietary Remote Procedure Call (PRPC) authentication
Step 3
Install the Collection Manager (see the “Installing the Collection Manager” section on page 15 ).
This task includes:
• Installing the SCMS Collection Manager software
•
Configuration related to the various adapters
•
Adding a user for PRPC authentication
• Configuring the SCMS Collection Manager to be able to connect to the database
Step 4 Install the Cisco SCA BB Console and optional Cisco SCA BB configuration utilities (see the “Installing the Cisco SCA
BB Application” section on page 18 ).
LINK RX
Cisco SCE 2000
Series 4xGBE
TX
RX MM TX
LINK RX TX
RX MM TX
LINK RX TX
RX MM TX
LINK RX TX
RX MM TX
GBE-1
SUB
LINE NET
PWR B STATUS PWR A
BYPASS
10/100/ 1000
LINK/
ACTIVE 10/100/
1000
LINK/
ACTIVE
GBE-2
SUB LINE/CAS
CADE NET
AUX CONSOLE
MNG 2 MNG 1
274176
SCE platform
RDRs
CLI and
SNMP
XML/RPC
Subscriber info
Subscriber
Manager
SCA BB application
Service policy and
quota management
Network
management
Collection
Manager
1
2
3
4