26
Step 6
In the Protocol Pack (SPQI) Update pane (see
Figure 17
), check Skip Protocol Pack Update and click
Next
.
Note
If you install the protocol pack during the upgrade, it must be the same version or a later version of the
protocol pack you are upgrading from.
Figure 17
SCE Software Upgrade Wizard—Protocol Pack (SPQI) Update
Note
Cisco SCE does not support direct downgrade of higher PP versions to a lower PP version. While downgrading
the protocol pack from a higher version to a lower version, the Cisco SCA BB console displays an error message
and prevents you from applying the policy on the Cisco SCE.
Step 7
During upgrade (or downgrade), you need to check the Protocol pack version present in Cisco SCABB and SCE. If both
Protocol pack versions are not the same, the default service configuration fails when applied.
Clearing or Resetting Protocol Pack Version
If Protocol Pack version mismatch appears in Cisco SCE and SCABB, you need to clear or reset the Protocol pack to get the
default version.
To clear or reset the Protocol pack:
1.
From the Cisco SCA BB Console, choose
Windows > Preferences.
2.
In the Preferences window, expand the Service Configuration.
3.
Click
Protocol Pack
.
4.
Click
Clear Default Protocol Pack
.
5.
Click
OK
.
6.
Restart the SCABB to take effect the changes in any one of the following ways:
Summary of Contents for SCE8000 GBE
Page 28: ...28 Figure 19 SCE Software Upgrade Wizard Service Configuration PQB Update ...
Page 48: ...48 ...
Page 50: ...50 ...
