manualshive.com logo in svg

Cisco RV130, Administration Manual, Page: 135 / 141

Share
Download
Cisco RV130 Administration Manual Download Page 135

Managing Your Device

Backing Up and Restoring the System

Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide

132

8

 

By default, the file (startup.cfg, mirror.cfg, or backup.cfg) is downloaded in the 
default Downloads folder; for example, C:\Documents and Settings\admin\My 
Documents\Downloads\.

STEP  4

To clear the selected configuration, click 

Clear

.

Restoring the Configuration Settings

To restore a previously saved configuration file:

STEP 1

Choose 

Administration

 > 

Backup/Restore

 

Settings

.

STEP  2

In the Configuration Upload field, select the configuration to upload (

Startup 

Configuration

 or 

Backup Configuration

).

STEP  3

Click 

Browse

 to locate the file.

STEP  4

Select the file and click 

Open

.

STEP  5

Click 

Start to Upload

.

The device uploads the configuration file and uses the settings it contains to 
update the Startup Configuration. The device then restarts and uses the new 
configuration.

Copying the Configuration Settings

Copy the Startup Configuration to the Backup Configuration to ensure that you 
have a backup copy in case you forget your username and password and get 
locked out of Device Manager. To get back into Device Manager, reset the device 
to factory default. 

The Backup Configuration file remains in memory and allows the backed up 
configuration information to be copied to the Startup Configuration, which restores 
all of the settings.

To copy a configuration (for example, to copy a startup configuration to the backup 
configuration):

STEP 1

Choose 

Administration

 > 

Backup/Restore

 

Settings

.

STEP  2

In the 

Copy

 field, choose the source and destination configurations from the drop-

down menus.

Summary of Contents for RV130














































































































































Reviews:

No comments